How to Remove the Battery on a Ventus V1 / V1+

This article explains how to safely remove and reinstall the battery on your Ventus V1 or V1+ by following the procedure shown in the video below. Battery removal may be required for charging, transport, storage, or maintenance.

▶️ Video Guide:
How to Take out My Ventus V1/V1+ Battery

Overview

By following this guide and the accompanying video, you will learn how to:

• Properly power down the bike and battery

• Access the battery compartment

• Safely disconnect, remove, and reinstall the battery

⚠️ Important: The battery must be powered OFF during both removal and reinstallation.

Prerequisites

Before starting, ensure the following:

• You have a Ventus V1 or V1+

• The bike is on a stable stand or flat surface

• The battery is powered OFF

• You are working in a safe, clear area

⚠️ Never attempt to remove or install the battery while it is powered on.

Battery Removal Instructions

1. Power Off the Bike and Battery
   Confirm the bike is fully powered down and the battery switch is set to OFF.

2. Access the Battery Compartment
   Follow the steps shown in the video to remove any required panels, covers, or hardware to access the battery.

3. Disconnect the Battery
   Carefully disconnect the battery connector as demonstrated.
   Do not pull on wires—only disconnect using the connector housing.

4. Remove the Battery
   Once disconnected, carefully lift the battery out of the bike.
   The battery is heavy—use proper lifting technique.

5. Inspect the Battery
   Before charging or storing, visually inspect the battery and connectors for damage or debris.

Reinstalling the Battery

⚠️ The battery must remain OFF during installation.

1. Place the battery securely back into position.

2. Reconnect the battery connector firmly and fully.

3. Reinstall all panels and hardware removed during access.

4. Once installation is complete, you may power the battery and bike back on to confirm proper operation.

Battery Storage Guidelines

• Store the battery within the manufacturer’s recommended temperature range

• For long-term storage, maintain the battery between 30%–70% charge

• Avoid storing the battery fully charged or fully depleted for extended periods

• Do not expose the battery to temperatures outside the recommended range

Following these guidelines helps preserve battery health and long-term performance.

Tips & Best Practices

• Always confirm the battery is OFF before connecting or disconnecting

• Do not force connectors—if resistance is felt, stop and recheck alignment

• Avoid dropping or impacting the battery

• Refer back to the video if any step is unclear

Need Help?

If you experience difficulty removing or reinstalling the battery, or if any components appear damaged, contact your authorized Ventus dealer for assistance before continuing.