Ventus One Plus Battery Lid Cover — Installation Guide

This article explains how to install the Ventus One Plus (V1+) battery lid cover. All required hardware is included with the battery lid, and installation is straightforward when following the video guide below.

⚠️ Important: This installation does require minor modifications. Please watch the full video before beginning and follow each step closely.

What’s Included

The Ventus One Plus battery lid cover ships with all necessary mounting hardware needed for installation. No additional parts are required beyond standard hand tools.

Installation Overview

The recommended installation method is to follow the step-by-step video guide. The video walks through proper fitment, hardware placement, and required modifications to ensure a secure and correct install.

👉 Watch the full installation video here:
How To Install The Ventus Carbon Fiber Battery Lid Cover 

Notes Before Installing

• Review the entire video before starting

• Follow the modification steps exactly as shown

• Do not force fit any components

• Verify proper fitment before final tightening

If you are unsure at any point during installation, stop and rewatch the corresponding section of the video.

Final Check

Once installed, confirm the battery lid is fully secured and does not interfere with battery removal, wiring, or frame components.

For additional assistance, contact Ventus support or your authorized Ventus dealer.