Ventus V1+ Tune Reset & Recovery Guide

1. Overview

This article explains how to restore the correct tune on your Ventus V1+ if settings were changed incorrectly and the bike no longer performs as expected. This is the fastest and safest way to return your bike to a known-good tune.

Most riders are viewing this guide after adjusting controller settings and experiencing reduced performance, abnormal throttle response, or unexpected behavior. The recommended method is to follow the video below, which walks through the full reset and re-tune process step by step.

🎥 Watch the full step-by-step video here: 
How to restore the best tune on your Ventus V1+

2. Prerequisites

Before starting, make sure you have the following:

Software / Tools:

• Ventus tuning app (latest version)

• Bluetooth enabled on your device

Time Required:

• Approximately 5–10 minutes

⚠️ Important: This process should only be performed while following the video. Skipping steps or changing values outside the guide may result in improper tuning.

3. How to Restore the Correct Tune (Video Reference)

Because tuning settings directly affect performance and reliability, this process is demonstrated entirely in the video.

The video will walk you through:

• Connecting to the Ventus controller

• Identifying incorrect or modified parameters

• Resetting settings to the correct baseline

• Reapplying the optimized Ventus V1+ tune

• Verifying the tune is saved properly

📌 Follow the video in order and do not adjust additional settings outside what is shown.

4. Expected Result

After completing the steps shown in the video:

• Throttle response should feel smooth and predictable

• Power delivery will return to the intended Ventus V1+ profile

• The bike should operate normally without error or limiter behavior

If performance still feels off, rewatch the video and confirm each step was completed exactly as shown.

5. Common Reasons This Issue Occurs

• Adjusting advanced controller parameters without a baseline saved

• Increasing values beyond recommended limits

• App disconnecting before settings were saved

• Importing an incompatible tune profile

This guide and video exist to give you a reliable recovery path if any of the above occur.

6. Important Notes

• Always save a backup of your working tune before making changes

• Make small adjustments only when testing performance changes

• If you are unsure what a setting does, do not modify it

For most riders, the stock Ventus V1+ tune shown in the video provides the best balance of power, control, and reliability.

7. Related Articles

• Ventus V1+ Controller Basics

• Understanding Power Modes on the Ventus V1+

• Battery & Controller Compatibility Guide